Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO Upgrade failing 6.0(14) to 6.0 (1803)

Status
Not open for further replies.

Daudet

Vendor
May 29, 2006
49
CA
Hello all
I tried to upgrade an IPO from the VMPRO Manager.
VMPRO has 2 network connection, one on Data lan and one on Voice lan.
When i started the upgrade i had all item in double like
IPO 500 V2 twice, and everymodules were in double too.
Probably due to dual nic.
When i pressed Upgrade it moved the files to first IPO 500 V2 ok but failed the second one and so one for other module. So i cancel out of upgrade because i was not sure if it would go.
Now i am using another PC only on the Voice vlan to upgrade it and
I got a fail all the way.
I have rebooted the IPO and it does the same thing after.
How to recover from this and do the upgrade.

See picture enclosed.

Anyone have encoutered this issues.

Thanks


Daniel Audet
Avaya Application Specialist
MTS Allstream
Montreal, Quebec, Canada
 
On what Avaya systems are you a specialist?
Upgrading an ipoffice should be very simple.

Where you prompted for the password?


BAZINGA!

I'm not insane, my mother had me tested!
 
Try "password" for upgrading, it doesn't use the same one as configuration via Manager :)

ACSS (SME)
APSS (SME)


"I'm just off to Hartlepool to buy some exploding trousers
 
but all his training and experience would have told him that right?

and hes signed himself up as a vendor too... yikes... poor customers!

ACSS - SME
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top