IPO to IPO to Panasonic PBX

[ecbalaro]

hi all,

this is the current setup.

[IPO1] <---IP TRUNK---> [IPO2] <---SPA8800 A---> <---SPA8800 B---> [PANASONIC PBX]

IPO2 to PANASONIC PBX and vice versa calls is now working.

below are possible with the current setup?
1. IPO1 will call a local number (dialing local number directly) in PANASONIC PBX
2. IPO1 will use the analog trunkline that was terminated in PANASONIC PBX in calling outside (PSTN)

Thanks in advance for the help.