IPO to Definity

[kflounders]

2.1.27 connected to CM1.1 Definity G3 SI via Frame relay VoIP Trunks with networked Intuity. Everything works great, except when callers dial the Definity and are transfered to the IPO.

The call goes through fine and has two way audio but if it is placed in Park or transfered to another IPO extension the call goes into one way audio.

 

[crashtest1000]

Try this
1. On the IPO under nouser source codes add the word PATCHES=10 reboot sytem

2. Turn off fast start on the IPO reboot syetem you could also try it with Fast start on.

Yes had this problem before we are OK now but had upgrade the 8700 to 2.2 or something.

 

[kflounders]

Thank you, I will give it a try