I have a IPO 403 via fiber to definity r11. Voice quality is great all is well expect 2 things. 1 while on a udp call across the fiber you are talking and all of a sudden, boom, it starts ringing busy? Secondly, I am routing all outgoing calls from the IPO across the fiber and out the definity. It works fine, but when the user f/ the IPO side dials the call, there is not dial tone? You hear dead air until the caller answers. I have verified all silence supression etc, and followed the white paper for ipo to definity setup to a T. Any one have any ideas? The codec is g711 uncompressed, and all udp calls are fine, signaling is set fine etc? Anyone see this.
vmail
vmail