IPO Server Edition and Panasonic via QSIG

[BrianCosta]

Hi Forum,

I want to try to connect an IPO Server Edition and an Panasonic via QSIG using Media Gateway
I have a Primary, Secondary, and IPO gateway, and the gateway have a PRI Card.
is the voice networking is required on IPO servers and IPO gateway or only just in IPO gateway.
another matter, if the main PRI line is on panasonic, can the IPO users use it through the qsig configuration ?

Thanks

 

[derfloh]

Depending on the configuration of both PBXs it will be possible to dial out through the Panasonic.

Each node in a Server Edition solution has voice networking channels.

IP Office remote service
Fixed price SIP trunk configuration
CLI based call blocking
SCN fallback over PSTN

 

[BrianCosta]

@derfloh

Thanks, but I can't see the SCN license in the config. file.
as your expalin above, no need to add the SCN license as it's already server edition have it.

Thanks

 

[derfloh]

OK... A few steps back...

What systems and which version? ADI or PLDS licenses? Local licensing or centralized?

The voice networking channels are part of the server edition license each node needs. You should see them in SSA under licenses and/or in the status of the SCN line.

IP Office remote service
Fixed price SIP trunk configuration
CLI based call blocking
SCN fallback over PSTN