IPO on PRI Sending Calls as National/Unknown 2

[andynetcon]

Working on a system right now with a 23 channel PRI (Verizon) attached. Inbound works just fine, but outbound is not working. It seems like the calls are being sent out as national and I should be sending them out as unknown. What I'm seeing in the system monitor is that the IPO is sending out 91XXXXXXXXXX instead of just 1XXXXXXXXXX or XXXXXXXXXX. What short codes do I need to add to the ARS table to get this functioning? Are there any settings on the PRI configuration screen that edit this? The documentation touches on this briefly, but I seem to be missing something/am lacking the technical expertise to execute exactly what's needed. Would one of you kind gents be able to point me in the right direction?

Thanks,

 

[DigitelD]

See if this works:



This Tech Tip was released to announce a new option to change the Called Party Numbering Plan. The announcement was made prior to the 4.2(11) GA code release and did not take into account future release schedules. This feature has now been permanently implemented, and there is no longer any need for a Private Build. Simply add the source number of “NI2_CALLED_PARTY_TYPE=UNKNOWN” to the NoUser profile on any IP Office running firmware 4.2(11)+ experiencing calls failing for an invalid numbering plan.


SHK Certified (School of Hard Knocks)
NCSS, ATSP/IP

 

[Telecomboy]

DigitalD's response is correct. If Verizon see's it as National, add that source number into the NoUser profile exactly as he has it (without the quotes). This will send all calls out as unknown vs. national.

 

[andynetcon]

You guys are absolutely magical.