Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO Manager creating IP route in windows

Status
Not open for further replies.

karlzre

Technical User
Jan 2, 2007
344
BE
HI,

We just upgraded a customer to IPO R11.

here is the network config:


PC ----Network 10.0.0.0 --- 10.0.0.1 Router 172.12.12.254 --- Network 172.12.12.0 --- ipo 172.12.12.1

Windows has a a iproute 172.12.12.0 255.255.255.0 10.0.0.1

I can ping ipo without any issue

When we start the manager i can find a new iproute 172.12.12.1 255.255.255.255 10.0.0.1 metric 11, and i cannot ping ipo anymore but i can ping all others device in the network 172.12.12.0

Any idea why the manager create this iproute ?
How can i set up the manager to not create this route ?
we didn't had this issue in release 10.
Thx

ACIS - ACSS
 
Doesn't happen on mine, I've disabled BootP so try doing that in Manager -> Preferences.

"Trying is the first step to failure..." - Homer
 
DHCP mode isn't client and it's pulling a DHCP IP address on one of the LAN ports?

Depending on the URI configuration the ICR can be completely ignored.

If your URI is configured to use internal data then the IP Office will look into the user's SIP tab and if you have *'s it will look into ICR.

A madman with a taste for speed.
 
Just find if i start the manager as "administrator" it add the route otherwise it didn't ...

ACIS - ACSS
 
grr, i've edleted the route and it didn't add again ... very difficult to reproduce.

ACIS - ACSS
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top