Hi,
I am trying to setup async console access to our IPO via a Cisco 2811. I have configured the line with the required 38400 baud rate and stopbits etc. However, I dont seem to be able to get conectivity, it might be the pinouts on the rs232 adapter or am i missing something on the line configuration. Config below.
Cheers,
Scott.
line 0/0/0
session-timeout 10
exec-timeout 0 0
transport input telnet
transport output none
escape-character BREAK
stopbits 1
speed 38400
flowcontrol software
I am trying to setup async console access to our IPO via a Cisco 2811. I have configured the line with the required 38400 baud rate and stopbits etc. However, I dont seem to be able to get conectivity, it might be the pinouts on the rs232 adapter or am i missing something on the line configuration. Config below.
Cheers,
Scott.
line 0/0/0
session-timeout 10
exec-timeout 0 0
transport input telnet
transport output none
escape-character BREAK
stopbits 1
speed 38400
flowcontrol software