Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO 9.0.2.0_860 STUN server issue

Status
Not open for further replies.
jr001

jr001

Vendor
Sep 11, 2008
54
US
Hi Guys,

I recently upgraded my IPO from 9.0.1.1_8.. to 9.0.2.0_860 and after the upgrade all my sip trunks would no longer register( i have to different trunk providers).
I managed to pinpoint the issue to the Stun server . I tried to change it to different ones and it the only way i get my trunks to register is to manually enter my IP address and to manually configure ports 5060 in TCP and UDP feilds and to leave the stun server field blank.

Any ideas?
 
Status
Not open for further replies.

Similar threads

V
  • Locked
  • Question
control unit with IPO SE license issue
Replies
8
Views
568
Mo. Abdullah
Mo. Abdullah
lleeNC
  • Locked
  • Question
IPO R12 on HP Proliant Avaya Server Issues
Replies
5
Views
737
IamaSherpa
IamaSherpa
finest
  • Locked
  • Question
SMTP Server for IPO SE+VM
Replies
2
Views
408
franciscomcorona
franciscomcorona
finest
  • Locked
  • Question
IPO 12.0 Server Edition - Physical Server - Dell R240 - ETH1/LAN2 Not Working
Replies
3
Views
456
Mo. Abdullah
Mo. Abdullah
Qzwsa
  • Locked
  • Question
IPO not connecting to new R12 application server
Replies
2
Views
625
derfloh
derfloh

Part and Inventory Search

Sponsor

Back
Top