Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO 500 30 extension Module Analog : V2

Status
Not open for further replies.

ashutosh2501

Technical User
Feb 13, 2015
36
IN

The rack is full for any addition and I need to add 2 x 30 extension modules.
How much max. distance can put these modules from control Modules ( expansion card)
 
You must use the special blue cable (it's shielded)
You need to put 4 modules above and 4 below the control unit.
 
Max 12 modules. But therefor you need to fit an expansion board in slot 4 of the IPO500V2 and use the supplied YELLOW cables.
 
you guys are missing the point, he has no room left in his rack for an additional module
 
1 Meter if you are connecting to the rear expansion ports, 2 meters if you are connecting to a 4 port expansion card. Figure out your rack space to accommodate it, and don't try to go a longer distance, because it WON'T work
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top