IPO 5.0 & Sip Trunks

[PRNDL2]

I have an IPO 500 rel 5.0 install w/sip trunks. I've never implemnted sip trunking before and was wondering if anyone had a config they could share or refer me to a good install doc.

Thanks in advance.

 

[kwing112000]

Who is the provider on the SIP?

Kevin Wing
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries

 

[PRNDL2]

PaeTec

 

[kwing112000]

look on the knowledgebase. there are docs for how to set it up

http://marketingtools.avaya.com/knowledgebase

there are docs for paetec and how to set this up.

Kevin Wing
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries

 

[PRNDL2]

Maybe I'm looking in the wrong place (IP Office Knowledgebase) but I can't find specific docs (step by step) on a sip trunk or more specifically a PaeTec sip trunk install...any help is appreciated.

 

[TomMills]

one of these maybe?

http://marketingtools.avaya.com/kno...ergedProjects/manuals/appnotes/paetec-ipo.pdf

http://marketingtools.avaya.com/kno...edProjects/manuals/appnotes/PAETEC-GB-IPO.pdf

http://marketingtools.avaya.com/kno...ce/mergedProjects/manuals/appnotes/paetec.pdf

http://www.twitter.com/tem1985

ACSS-SME
Get well soon Aaron.

 

[PRNDL2]

Ahhhh yeah...how did you find/search them? My search's came up blank....and thanks!!

 

[PRNDL2]

Thanks TomMills, I found the application notes page

 

[TomMills]

no worries. play around with the drop down boxes at the top. opens up a whole new knowledgbase.

http://www.twitter.com/tem1985

ACSS-SME
Get well soon Aaron.