Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO 403 upgrade to 406V2 1

Status
Not open for further replies.

Telecomboy

Programmer
May 8, 2003
4,111
US
I have a client that has an IPO 403 R3.69. They utilize SCN to (2) other sites that both have 406 V2's. They would like to upgrade the 403 to a 406 V2 and then upgrade all to R5 software. Currently, they need no SCN license as they just have the vcm cards in each IPO. When going to R5, do they need to buy scn licenses or is the fact that they have 406's with vcm's all that is needed to keep the scn going?
 
I tried setting up another group and then putting the AA group in as the overflow, it went to the branch's voicemail. I then tried to create a short code with the AA recordings and put that in for the incoming call route, it still went to the group voicemail.
 
Telecomboy, the 400 serie does not need any SCN licenses.
Only the 500 do need those licenses.


Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!

Sarcasm, it's only one of the services I offer.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top