intrigrant
Systems Engineer
Recognise one of the following?
LDAP broken in V2.1(15)
When faxing from a PRI to E&M tie call drops
IPO to 3rd party Voicemail via Qsig - Errors when connecting
Inconsistency between absent text on Phonemanager and 2050 terminals
IPO maxes out on TFTP requests, cannot open config or connect via Call Status
2 seconds of Voicemail message deleted when call originates on Alog Trunk
Customer site: BLF Keys at Main Site of SCN are removed after remote site reboot
T1: Incoming Routing Digits setting should not override the stars format the way it does
analogue lines answer from remote DSS/BLF pickup
mute all on conference Server caused IPO to loose all expansion units
Call transferred by Auto-Attendant will not clear if unanswered - tone disconnect
Keypad tones on 6416 very short or non-existent
Data Routing - No Routing Table display
Remote call forward doesn't work when forced account code is enabled
Ring back on PMP is failing
Soft Console / Phone Manager and Shortcode dialling issue
Phonemanager breaks anti-tromboning on blind transfers, doesn't release VCM’s
Assisted transfer via voicemail pro does not dial externally
Message waiting incorrect on POT in ITA locale
VM Pro whisper action not working
Whisper - reject call by dialling digit then hang up will disconnect call
China E1R2 issues - Seize command not setting '1' in 'C' bit
IP412 version 2.1.15 rebooting 3-4 times a day
Customer site: Call in queue presented in incorrect order
Customer site: Module Reset
User Ex Directory feature doesn't work after Merging
Call stuck in queue
2.1(9) WAN3 10/100 reboot under load if QOS/Multilink is not enabled
WAN3 unable to use IP routes beyond the local LAN1 interface of a CPU
Manually setting time on a US system phone issue
Second call (with same Account Name as first) into RAS does not get dropped
Forward to HG with no agents available or if call covers to VM, switch reboots
IP Office 406 reboots with software load 2.1.23
Unit 1 IP412 House Switch Crash
Customized BTD stops working after upgrading to 2.1.15
2420 Station log file drops digits
Customer reports beeps on calls after switch upgrade
Hot Desk Users are always enabled in Hunt Groups - even when they logoff
Memory leak at customer site
Fatal TLB Error and reset during Internal Call
SNMP - spurious ipoGenEntityChangeEvent traps generated
SNMP - warmStart/coldStart traps not seen on wire
SNMP: non DS8 ipoPhonesPort xref to entPhysicalTable table
incorrect
SNMP: phone entries in entPhysicalTable incorrect
SNMP: SysobjectID incorrect for every variant but DS8
User name changed to Zabcdefg" causes DT handset problems
with use (3 Issues)
Hunt Group-Rotary doesn't work as expected(after a group member logs-out)
Forced account code on 1 terminal affects voicemail call on another terminal
VM calls - speech dropping out, call disconnecting 10 seconds later
Ring-back when free doesn't work as a button on IP terminals.
IPO 406 Reboots during Page Call
Calculation of Time Profile End Time flawed
Calls not being presented to call centre despite being visible on Phonemanager
If a user is call listening to another extension, voicemail does not work as expected
Call intrude provokes switch reboot
blind transfer rings first extension 5 times, subsequent
extensions 2 times only
IPO disconnects internal call to AA while trying to change the greetings
Calls Getting stuck in Queue "..."
LCR alternate route does not work if force acc. code is enabled in user restrictions
IP 406v2 OCR UNIT does not detect WAN
Embedded Voicemail - Group Mailbox cannot retrieve messages
Embedded Voicemail Auto-Attendant - * Key non functioning
Fax over IP over Frame failure
Cannot dial account code restricted numbers from external call
IP Phone Paging: VCM’s allocated on a per IP endpoint basis
Overflow on call groups
Unexpected Module Reset
Analogue Trunks ring 'main' on outbound call
IP 403 resetting after upgrade
Unexpected IP Office reset
2.1.5 VM Pro whisper transfer function fails
Assisted Transfer Action: No initial Greeting when transferred to Voicemail
Assisted Transfer Action: Call Does not Transfer
Assisted Transfer Action: Dial-tone is played when collecting messages
The end of voicemail messages are over-trimmed by approx. 2 seconds
Wizard-The login/Password screen has the title off centre and tabbed to the right
Wizard-IP406v2
ffline: Hardware Config: No dual line cards in slot A drop down box
Wizard-IP406v2ffline: Hardware Config: No VCM 30 in drop down box
CBC-Error on opening Trunk Utilisation Graphs
If you see your problem in this list then ask your vendor to participate in the fieldtrial of 2.1(27)!
LDAP broken in V2.1(15)
When faxing from a PRI to E&M tie call drops
IPO to 3rd party Voicemail via Qsig - Errors when connecting
Inconsistency between absent text on Phonemanager and 2050 terminals
IPO maxes out on TFTP requests, cannot open config or connect via Call Status
2 seconds of Voicemail message deleted when call originates on Alog Trunk
Customer site: BLF Keys at Main Site of SCN are removed after remote site reboot
T1: Incoming Routing Digits setting should not override the stars format the way it does
analogue lines answer from remote DSS/BLF pickup
mute all on conference Server caused IPO to loose all expansion units
Call transferred by Auto-Attendant will not clear if unanswered - tone disconnect
Keypad tones on 6416 very short or non-existent
Data Routing - No Routing Table display
Remote call forward doesn't work when forced account code is enabled
Ring back on PMP is failing
Soft Console / Phone Manager and Shortcode dialling issue
Phonemanager breaks anti-tromboning on blind transfers, doesn't release VCM’s
Assisted transfer via voicemail pro does not dial externally
Message waiting incorrect on POT in ITA locale
VM Pro whisper action not working
Whisper - reject call by dialling digit then hang up will disconnect call
China E1R2 issues - Seize command not setting '1' in 'C' bit
IP412 version 2.1.15 rebooting 3-4 times a day
Customer site: Call in queue presented in incorrect order
Customer site: Module Reset
User Ex Directory feature doesn't work after Merging
Call stuck in queue
2.1(9) WAN3 10/100 reboot under load if QOS/Multilink is not enabled
WAN3 unable to use IP routes beyond the local LAN1 interface of a CPU
Manually setting time on a US system phone issue
Second call (with same Account Name as first) into RAS does not get dropped
Forward to HG with no agents available or if call covers to VM, switch reboots
IP Office 406 reboots with software load 2.1.23
Unit 1 IP412 House Switch Crash
Customized BTD stops working after upgrading to 2.1.15
2420 Station log file drops digits
Customer reports beeps on calls after switch upgrade
Hot Desk Users are always enabled in Hunt Groups - even when they logoff
Memory leak at customer site
Fatal TLB Error and reset during Internal Call
SNMP - spurious ipoGenEntityChangeEvent traps generated
SNMP - warmStart/coldStart traps not seen on wire
SNMP: non DS8 ipoPhonesPort xref to entPhysicalTable table
incorrect
SNMP: phone entries in entPhysicalTable incorrect
SNMP: SysobjectID incorrect for every variant but DS8
User name changed to Zabcdefg" causes DT handset problems
with use (3 Issues)
Hunt Group-Rotary doesn't work as expected(after a group member logs-out)
Forced account code on 1 terminal affects voicemail call on another terminal
VM calls - speech dropping out, call disconnecting 10 seconds later
Ring-back when free doesn't work as a button on IP terminals.
IPO 406 Reboots during Page Call
Calculation of Time Profile End Time flawed
Calls not being presented to call centre despite being visible on Phonemanager
If a user is call listening to another extension, voicemail does not work as expected
Call intrude provokes switch reboot
blind transfer rings first extension 5 times, subsequent
extensions 2 times only
IPO disconnects internal call to AA while trying to change the greetings
Calls Getting stuck in Queue "..."
LCR alternate route does not work if force acc. code is enabled in user restrictions
IP 406v2 OCR UNIT does not detect WAN
Embedded Voicemail - Group Mailbox cannot retrieve messages
Embedded Voicemail Auto-Attendant - * Key non functioning
Fax over IP over Frame failure
Cannot dial account code restricted numbers from external call
IP Phone Paging: VCM’s allocated on a per IP endpoint basis
Overflow on call groups
Unexpected Module Reset
Analogue Trunks ring 'main' on outbound call
IP 403 resetting after upgrade
Unexpected IP Office reset
2.1.5 VM Pro whisper transfer function fails
Assisted Transfer Action: No initial Greeting when transferred to Voicemail
Assisted Transfer Action: Call Does not Transfer
Assisted Transfer Action: Dial-tone is played when collecting messages
The end of voicemail messages are over-trimmed by approx. 2 seconds
Wizard-The login/Password screen has the title off centre and tabbed to the right
Wizard-IP406v2
ffline: Hardware Config: No dual line cards in slot A drop down boxWizard-IP406v2
ffline: Hardware Config: No VCM 30 in drop down boxCBC-Error on opening Trunk Utilisation Graphs
If you see your problem in this list then ask your vendor to participate in the fieldtrial of 2.1(27)!