Have built trunks to two 8.1.2 Session managers from the Primary and Secondary Servers in IPO SE 11.0.4.4. When you build the trunks it auto assigned Outgoing group 98888 or something similar to the Trunks but there is no incoming group on the Line config. Error table complains about Lines with incoming group 0, all works ok. How do you set the Incoming Group to get rid of the error?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IPO 11.0.4.4 to SM 8.1.2
- Thread starter bignose21
- Start date
- Status