IPLU R3B to R3C upgrade

[rfpup]

Hi to all;

I had R3A software to IPLU, upgraded normally to R3B but can not upgrade to R3C.
When unzipping R3A & R3B there was a zipped file with name IPLU.
When unzipping R3C there are much more files in it.

Please any idea?
Thank you

 

[rfpup]

No one has tried new software for IPLU?

Any idea ?

Thanks

 

[ceejay55]

Copy it on your pc-alot easier
Craig

 

[cfrei]

I think this file should be load zipped.

 

[rfpup]

R3A & R3B had two files; config, as txt file and iplf as zipped file
If renaming R3C after downloading to iplf, config file is missing
Do you think the upgrade process can run even without config file?

Thank you for your reply

 

[whosrdaddy]

in fact you need 3 files.

the iplf, config.txt and unzip

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[rfpup]

Yes, unzip also, but this was present only in R3A and not in R3B.
Perhaps (I may be wrong) unzip is saved inside flash card of IPLU from the first upgrade to R3A.
I had no problems when upgrading from R3A to R3B even unzip was missing.

Thank you

 

[rfpup]

Renaming the downloaded R3C file to IPLP.zip did not solve the problem.
Upgrading the IPLU from R3B to R3C is still unsuccessful.
If someone has some other ideas let us help

 

[rfpup]

Any news from anyone who is using the latest R3C firmware in IPLU?
How have you done the upgrade?

Regards

 

[whosrdaddy]

yes I have.
config.txt was also zipped. unzip it...

btw : the zip file must be named IPLF.ZIP

I did the upgrade by unzipping the files manually onto the flash card.

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[rfpup]

Thanks for your help whosrdaddy!
The upgrade went well from R3B to R3C. Only two files were needed; config.txt wich was inside the downloaded file and iplf.zip.