Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IPLU in Stackable LIM
- Thread starter lalrl
- Start date
Hi lalrl,
For each ELU33/34 or FTU2 you need
1 off Support front ELU33, ELU34, FTU2/11 SXA 112 3022/03
1 off Designation SVA 103 304/1
For cabling ELU33/34 there are two possible solutions,
use the adapter cable TSR 910 1058 and use the old cabling to the MDF with 16 individuals,
or make a new cabling by using cable TSR 910 1054/16M or /32M with 32 individuals to the MDF.
For the IPLU, there is no support front, just remove the existing card front and slot it in. Not ideal I know, but it is the Ericsson way
For each ELU33/34 or FTU2 you need
1 off Support front ELU33, ELU34, FTU2/11 SXA 112 3022/03
1 off Designation SVA 103 304/1
For cabling ELU33/34 there are two possible solutions,
use the adapter cable TSR 910 1058 and use the old cabling to the MDF with 16 individuals,
or make a new cabling by using cable TSR 910 1054/16M or /32M with 32 individuals to the MDF.
For the IPLU, there is no support front, just remove the existing card front and slot it in. Not ideal I know, but it is the Ericsson way
- Status
Similar threads
- Locked
- Question