IPLU firmware

[TeleLion]

Am unable to see the ILPU firmware:

MDSH> board_list -bpos 1-0-00
Device board position information

Boardpos Brdid  Individs   Signal   State      Status
                           format
  1-0-00   119        32   long     active     assigned
MDSH> board_sw -status -bpos 1-1-00
Device board revision information

Boardpos Brdid Board name  Product number      Rev      Status  Add
          /ind
Board not found
/[code]

TELEC3

 

[whosrdaddy]

what is the status of the led on the board?

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[TeleLion]

Hey daddy,

Brain fart wrong sub-magazine:

board_list -bpos 1-0-00
board_sw -status -bpos 1-1-00

I should have used 1-0-00, it works fine:

MDSH> board_sw -status -bpos 1-0-00
Device board revision information

Boardpos Brdid Board name Product number Rev Status Add
/ind
1-0-00 119 IPLU ROF1375067/1 R2A
IPLU CAA 158 0040 R2F exe APPL
CAA 158 0037 R1B exe KERNEL
CAA 158 0038 R1C exe ROOTFS
CAA 158 0039 R1E exe MSP
CAA 158 0046 R1A exe INITRD
RYS 102 770 R1B exe BOOT
RYS 102 777 R2B exe FPGA
PCB CODE 2 exe HW CODE 0
Tue Jun 20 2006 exe 14:52:48

Thank you

TELEC3

 

[whosrdaddy]

* chuckle *

you should really upgrade that board (to at least R3C)
R2F is known as problematic

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!