ipLDK100 to BCM400 SIP trunk

[pleskuk]

Hi all,

I'm testing VoIP (SIP) connectivity between ipLDK100 and BCM400 systems. Using your tutorials I've been able to establish the trunk and network both PBXs together.

I use 3 digit dialing on both systems and i have 8 as route destination code for accessing the other system. It works perfectly.
The one thing i want to achieve is to use resources on the BCM400 from the ipLDK100.
On BCM400 i have ISDN BRI lines. I want to be able users from the side where ipLDK100 is to use those ISDN lines through the SIP trunk.
For an ex. I use 9 as access to the ISDN BRI from the BCM400. From the ipLDK when i dial 8 to ago out from the SIP trunk to the BCM400 and then dial 9 following the PSTN number i got an error: LINE RELEASED, CAUSE 403.

I'm not sure where to locate the cause of the problem. I use BCM monitor and see the VoIP line drops out once i dial #.
On ipLDK100 i have all setup, define access groups and everything.

Does anyone achieved to make this work?

Thanks in advance,
Ivo

 

[bigg3rdude24]

i managed to connect a BCM50 r2 and a ipLDK-60 via H.323 a few months ago. unfortunately i ran out of time to test what your trying to achieve.

most probably, additional configurations will be done at the ipLDK side. try to look for a thread wherein doktor gives a link where you can get his email address. he has a copy of the configuration. i can also send you the presentation but i dont know how can we exchange email addresses

 

[doktor]

I have the power point prensentation from morenot.

Information is found with this link (see lower part of text in English).

http://www.kandu.dk/spg97163.aspx

///doktor


///doktor

 

[pleskuk]

Hi guys,

I'm sorry for not answering few days, I've been out for a LG-Nortel event.
However thanks a lot for the useful information.
I will send email to the address provided.

Thanks again,
Ivo