ipldk100 number assignment.

[dnegreira]

Hello all.

I am a novice user of the ipldk100 system, i can not find a way to assign an external number to an internal extension, how do i manage to do that?

The aria-soho is connected to our NT (2ch) on CO1.

Kind regards,
dnegreira.

 

[morenot]

Do you want either assign incoming DID to set or call forward to external number?

 

[doktor]

dnegreira
Check this thread.
The commands are more and less the same, if you use PRI or BRI.
thread1613-1490511

///doktor

 

[dnegreira]

Morenot:

I want to assign an incoming DDI to an internal extension.

Doktor:

Most of the functions that you say to to do there (pgm143/146/etc) does not exist at the moment on my interface, i have at the moment only the CO1,2,3 that is standard on the aria soho, i do not have a isdn BRI or PRI interface.

Kind regards,
dnegreira

 

[bigg3rdude24]

as far as i know, DID is supported only on PRI lines

 

[doktor]

Hi bigg3rdude24

DID is supported on both PRI and BRI lines here in Europe, if you use the Euro ISDN.
Maybe DID is not supported on the BRI lines in your country?

++++++++++++++++

Hi dnegreira
An ipldk-100 system and an ARIA SOHO system may differ.
The commands are for the ipLDK-100.
I an not shure about the commands for the ARIA SOHO.
But I will try to check my sources for ARIA SOHO.
I guess that your question deals with getting DID to work with ARIA SOHO?


///doktor

 

[dnegreira]

Doktor,

I thought they could be the same configurations as they are similar, sorry if i am posting in a wrong forum.

"I guess that your question deals with getting DID to work with ARIA SOHO?"

Yes, that is true.

 

[morenot]

I want to assume what an incoming call hit either CO1 or CO2 or CO3 on Aria-soho and you want it rings in an extension.
If is this, then you can ring assignment in PGM 145 what CO you want rings to station.
If no, can you more explicit?

 

[dnegreira]

Morenot,

For example: we have three DDI's on our ISDN line, the final number is 1, 2 and 3 and they all come frome the same CO.

The numbers 1 2 and 3 at the moment are ringing on all the extensions, and i want to assign, for example, the number three to an internal extension with the number 200 for example.

I hope that i made myself clear.

Kind regards,
dnegreira.

 

[doktor]

Hi dnegreira

I checked my sources.
It seems to me that only PSTN/ analog trunks can be used together with the ARIA SOHO.

In that case the programming is different.
I will return with the correct commands...


///doktor

 

[doktor]

Hi again

Try this out:
CO Ring Assignment (PGM 144)
When the CO Service Type (ADMIN 140) is set to Normal, the CO incoming calls are routed to the proper destination according to this assignment. The destination can be a Station, Hunt Group, or VMIB announcement. The Ring assignment is applied separately by Day/Night Ring Mode by pressing FLEX 1-4.

So, what do you want?

Ex.1.: Let the CO line 1 ring at station 101 (in day mode):
PGM144 + CO 1-1 + FLEX1 + 1 (DAY) + STATION RANGE (101101)+ DELAY TIME (Range=0-9) + [HOLD/SAVE]

Ex.2.
Ex.1.: Let the CO line 1 ring at group 621(in night mode):
PGM144 + CO 1-1 + FLEX2 + 2 (NIGHT) + HUNT GROUP (Range=620-629) + [HOLD/SAVE]

Let me know if this works!

///doktor

 

[morenot]

dnegreira
What kind of ISDN line card do you have on Aria-Soho?

 

[doktor]

If you use ISDN, the commands are the same...

///doktor