ipLDK capacity (Ports) 1

[pleskuk]

Hi all,

Regarding ipLDK100 system I have one short question.
Reviewing the capacity scheme it is clearly stated that one cabinet (ipLDK50) can go up to max. 48 analogue/digital extension and max 40 Analogue/ISDN lines.

Ok! Thanks clear.
But the one thing that confuses me is the ports thats actually available.

For an example, how many ports i can use combined on ipLDK50?
Can i have for ex. 40 analogue extension, 8 digital and 1 ISDN PRI line? And all of that in one cabinet?

Thanks in advance,
Ivo

 

[doktor]

You can fill up the cabinet with local line and CO line boards in the 6 slots.
A configuration could be DTIB24 in slot 1, DTIB12 in slot 2, SLIB12E in slot 3, PRI in slot 4, LCOB8 in slot 5, VOIB in slot 6. (This gives no room for DECT and Voice mail).
This config will work...

///doktor

 

[pleskuk]

Thanks Doktor!

Definitely helpful.
I will try the configuration above in the next setup.

Thanks again,
Cheers
Ivo

 

[doktor]

Let me know if it works!
If you are using ipLDK-100 with 2 cabinets, make shure that you do not install more than max. two of these boards mentioned per cabinet: VOIB, VOIBE, VMIB, VMIBE, WTIB and WTIBE. This is because of the power supply, that will be overloaded.

///doktor