Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPLDK-60 Voice Mail Problem

Status
Not open for further replies.

maroondawg

Technical User
Jun 2, 2010
7
US
How can I get the vmib to transfer a call to a busy stations mail box instead of telling them the person is busy please try again.
 
2.3 Rerouting

2.3.1 Call Forward
Description
A Station User can forward calls to any Station, Station Group, or VMIB in the system by activating feature
codes. There are several types of Call Forwarding: Unconditional, Busy, No answer, Busy/No Answer,
Unconditional Station Off-Net Call Forward, No Answer Station Off-Net Call Forward, Unconditional Station
Off-Net Call Forward with Tel Number, No Answer Station Off-Net Call Forward with Tel Number, Incoming CO
Off-Net Call Forward, and Follow Me Call Forward.

Operation
To activate Call Forward, follow Operation directions in each sub-heading for this section.
To program Call Forward to a Flexible Button, perform the following:
1. Press the [TRANS/FOR] button.
2. Press the flexible button to be assigned.
3. Press the [TRANS/FOR] button.
4. Assign the Call Forward type:
? 1 = Call Forward, Unconditional
? 2 = Call Forward, Busy
? 3 = Call Forward, No Answer
? 4 = Call Forward, Busy/No Answer
? 5 = Unconditional Station Off-Net Call Forward
? 6 = No Answer Station Off-Net Call Forward
? 7 = Incoming CO Off-Net Call Forward
? 8 = Unconditional Station Off-Net Call Forward with Tel Number
? 9 = No Answer Station Off-Net Call Forward with Tel Number
? 0 = Follow Me Call forward
5. Dial the destination that will receive the call. <<<<< (SET # TO VOICEMAIL)
6. Press the [HOLD/SAVE] button.

To deactivate Call Forward, perform the following Steps:
1. Lift the handset or press the [MON] button.
2. Press the [DND/FOR] button.
3. Press the # key (Call Forward cancel code).

Condition
? To use Call Forward and Voicemail, a Station should be activated in Admin Programming. <<<< WATCH THIS...

Saludos...

JLMT//
 
have you tried auto forward to vmibin station programming. pgm 113 f14.timer in pg181 f20.
 
Could also try transfering the call directly to the stations mail box..

Press Trans/PGM
Call Back
Dial Station Number (eg 105)
Then Hang Up...

Regards
Steve
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top