IPLDK-60 Lg Nortel SMDR

[scorpiopy]

I wonder if the IPLDK-60 LG-Nortel supports have smdr lan or via ip for a control software calls and whether this is feasible?
and if we do not know if anyone pinout for rs232 for IPLDK-60
Thanks and good luck to all

 

[morenot]

You can get the call register by Serial Port or Lan
The pinout for serial connection is the Standart Serial Cable

 

[scorpiopy]

ok thank you very much morenot then the developer need to set up the call register send a lan? thanks

 

[doktor]

Hello.
Station Message Detail Recording (SMDR) can be programmed at PGM 177. Connect the serial port of MPB to the serial port of the PC with the RS-232C cable.
Setup the PC and the PGM 177, so these 2 settings match.
Then use e.g. Hyperterminal to log the SMDR data...
///doktor

 

[scorpiopy]

Ok thanks doktor and in case you want to schedule by Lan as I do for the collector software you can see that direction ip

 

[morenot]

You need too set up PGM 175 if it`s Serial o Telnet

 

[doktor]

Correct, I missed that one. If PGM175 and 177 are correctly set - up, then it wil work.
///doktor