IPLDK 20 Increase ISDN channels 1

[k0rrupt10n]

Hi,

I've just had an additional ISDN 2 channel line put in for the second BRI slot. I've set Co 3 & 4 exactly as 1 & 2, but there is no dialtone on those. I get ISDN released when I try. If I put the RJ45 into the first port I can dial out, so there is a config error within the LDk, but I can't see it. Any ideas?

 

[doktor]

Check the TEI setting in PGM203.

PGM 203 --- TEI-type

A point-to-point connection has Fixed TEI (=0).

A point-to-multipoint connection has Auto TEI ( not 0).

You also need to restart the ipLDK-20 when adding a new ISDN line.

///doktor

 

[k0rrupt10n]

Excellent! Worked a treat! Cheers mate.

 

[doktor]

OK. No worries, mate.

///doktor

 

[doktor]

& Thank you for the star...

///doktor