IPLDK-20 / Aria 24IP Call log / CPCU card 1

[Tim Smith]

Hi all,

I have a 24IP system installed (PSTN lines connected). We added a CPCU card to give us incoming caller ID functionality. I have read that its possible and have seen tutorial videos showing how to use it but am drawing a blank on configuring the incoming call number log. I am stumped and unsure where to start. Can anyone assist with any pointers?

Thanks in Advance!
Tim

 

[Jonah29]

Hi Tim,
Who is your line provider? You may need to subscribe to the CLIP service from that service provider, they will enable the feature on the PSTN lines. Then it should work out the box.

Regards
Mark

 

[Tim Smith]

Hi Jonah,

Thanks for that, we have functioning CLID on the system no problem. I'm just trying to figure out how to configure and use the system call log feature I have seen demonstrated but cant find a lot of info on.

Cheers
Tim

 

[Jonah29]

Hi Tim,
Got ya. Try this post;

http://www.tek-tips.com/viewthread.cfm?qid=1776808

I think these are the correct instructions for a call log button. I will check my records later.

Regards
Mark

 

[Tim Smith]

Hi Jonah

That's perfect, precisely what I needed, all sorted now and works great.

Uggg.... I hadn't read that post yet as it didn't seem to apply to me as I don't have the VMIB configured!!! so close!!

Thanks Mate
Tim

 

[Jonah29]

Hi Tim,
Glad you're sorted. Can you give make sue you give eatsfortreats a little pink star over on that post please?
Yeah sometimes the post title bears little resemblance to the solution! Just one of those things.
Regards
Mark

 

[eats4treats]

Jonah29



Eats

Ok, Press Trans *#..... TRANS/PGM..... the transfer key?.......sigh!

 

[Tim Smith]

Thanks Guys, i will do