Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPL Health not Matching

Status
Not open for further replies.

FunWithNortel

Technical User
Oct 24, 2006
82
0
0
US
Had a remote Carrier spit out a bunch of errors yesterday about the battery backup (which tests fine and is not monitored by the column) for some reason the switch swapped cores. I have the system monitor disabled and the the main sys mon pulled (replacement system monitor card in route)

However after coming up on core 1 I noticed my IPL health does not match. Not sure what to do to get it to match. I already tried a sysload on the inactive core and no change. (I thought IPL health came from my servers?)

Heres what the switch is telling me

.stat health ipl
Local (Side 1, Active, Redundant):
Local Total IPL Health = 8

IPL connection history:4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

Remote (Side 0, Inactive, Redundant):
Remote Total IPL health = 4

______________________________________________________________


.stat health
Local (Side 1, Active, Redundant):
Components without TIER 1 Health contribution:
==================================================
disp 1 15 1:In Service
sio2 1 15 1:In Service
cp 1 16:In Service
ipb 1:In Service

TIER 1 Health Count Breakdown:
=====================================
sio8 1 16 1: 0002
sio8 1 16 2: 0002
sutl 1 15: 0002
strn 1 15: 0002
xsmp 1 15 1: 0002
cnib 1 9: 0002
cnip 1 9 0: 0002
cnip 1 9 1: 0002
fmd 1 16 1: 0008
eth 1 16 0: 0002
Local TIER 1 Health Total: 26


TIER 2 Health Count Breakdown:
=======================================
ELAN 16 IP : 10.20.50.6 Health = 2
ELAN 17 IP : 10.20.50.7 Health = 2

Local AML over ELAN Total Health:4
Local Total IPL Health = 8

IPL connection history:4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

Local TIER 2 Health Total:12

Remote (Side 0, Inactive, Redundant):
Components without TIER 1 Health contribution:
==================================================
disp 0 15 1:In Service
sio2 0 15 1:In Service
cp 0 16:In Service
ipb 0:In Service

TIER 1 Health Count Breakdown:
=====================================
sio8 0 16 1: 0002
sio8 0 16 2: 0002
sutl 0 15: 0002
strn 0 15: 0002
xsmp 0 15 1: 0002
cnib 0 9: 0002
cnip 0 9 0: 0002
cnip 0 9 1: 0002
fmd 0 16 1: 0008
eth 0 16 0: 0002
Remote TIER 1 Health Total: 26


TIER 2 Health Count Breakdown:
=======================================
ELAN 16 IP : 10.20.50.6 Health = 2
ELAN 17 IP : 10.20.50.7 Health = 2

Local AML over ELAN Total Health:4
Remote Total IPL health = 4

Remote TIER 2 Health Total:8



______________________________________________________________

>ld 117
OAM000

=> stat serv

NODE ELANIP LDR SRV PBXLINK HOSTNAME
ID STATE
1000 10.20.50.10 NO MC32S LINK UP PHHSTGMDF001
APPS: VGW
PBXLINK DATE: 17/04/2011
PBXLINK TIME: 09:20:03
CONNECTID: 4064e00
VGWs: [reg - 00032] [busy - 00000]

1000 10.20.50.11 NO MC32S LINK UP PHHSTGMDF002
APPS: VGW
PBXLINK DATE: 17/04/2011
PBXLINK TIME: 09:20:04
CONNECTID: 4064d00
VGWs: [reg - 00032] [busy - 00001]

1000 10.20.50.9 NO HP DL320G4 LINK UP phhssgdc0002.trinity-health.org
APPS: LTPS
PBXLINK DATE: 17/04/2011
PBXLINK TIME: 09:30:29
CONNECTID: 4065000
Sets: [reg - 00005] [busy - 00000]
Type: HP DL320G4
Location: 0 0 0
Product Eng.Code: NTDK97AAE5
Serial Number: USE725NH9J
Memory Size: 2048 MB
Disk Size 74 GB

1000 10.20.50.8 YES HP DL320G4 LINK UP phhssgdc0001.trinity-health.org
APPS: LTPS VTRK
PBXLINK DATE: 17/04/2011
PBXLINK TIME: 09:30:42
CONNECTID: 4064f00
Sets: [reg - 00006] [busy - 00001]
VTRK: [reg - 00030] [busy - 00000]
SIPL VTRK: [reg - 00000] [busy - 00000]
SIGNALLING SERVER CAPACITY (SSRC): 2048
Type: HP DL320G4
Location: 0 0 0
Product Eng.Code: NTDK97AAE5
Serial Number: USE729N1SC
Memory Size: 2048 MB
Disk Size 74 GB


Thanks.






 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top