IPECS50a

[eats4treats]

Hi

I have 2 questions for you all!

1. We have a customer with an IPECS50a with 1 x analogue running through it. As a stand alone line it has outgoing CLI active but when through our system it displays 'unknown number'.

On the other LG products we use the CLCOB's etc but this is using the 1st port on the back of the IPECS. I assume its a setting that needs ticking or a license needs ordering. Help.

2. Is networking an IPLDK600 to other telephone systems, in particular a CISCO Call Manger, possible and if so would anyone care to share their thoughts or notes! Please.

Cheers

Eats

 

[doktor]

Hi !

1.
Test your analogue line with a loudspeaker or phone with speaker.
Just to hear if you receive any tones (indicating who is calling) before the phone rings.
Or with a display to hook on the analogue line showing what number is received.
There should not be licenses for this.
Check your "way" of converting the tones from the public exchnage.
Is it FSK or DTMF?

2.
I guess it will work. We have had success with interconnecting the Aastra MD110 and the iPECS.


///doktor

http://www.kandu.dk/spg153996.aspx

 

[eats4treats]

Hi doktor

1. Didnt really explain myself, my outgoing cli isnt being sent from the IPECS. Because it was analogue lines I passed by pgm114(Station ISDN Attributes) and the CLIR function. Will remember that one.

2. Do you have any notes regarding the network of that particular system?

Cheers

Eats

 

[doktor]

No, we just hooked up a standard H.323 trunk in the MD110 and called through.

///doktor

http://www.kandu.dk/spg153996.aspx