IPECS MG - SIP Trunks

[Skippie1]

Good day, I have a IPECS MG from Aria and you get 4 port VOIP module or AAFU on the processor. I can't get the SIP trunks to work on the VOIP module on the processor. Any suggestions?

 

[Chamvari]

You have to convert the 4 ports on the MPB to VoIP Channels by default they come as VMIB. Go to Slot Assignment PGM 101 on port 0 change the VMIB ports from Vmib to VoIP

Dial Tone shoul be There

 

[Skippie1]

I did change it to VOIB and can pick up the trunk but when I dial a number it gives me "dialing too late" after a few seconds.

 

[Chamvari]

You also need to goo Pgm 103 append the ports into logical assignment. Have one all the registration programming because you will mot access the line like a normal pstn until Its programmed . Hope it helps

Dial Tone shoul be There

 

[amiri139]

Hi,
I want to set up SIP on IPECS 50A, but I don't know how can I access to PGM133 and PGM 126. Any suggestions?