iPECS-100 v.5 with Broadvox SIP Trunk

[nfcphoneman]

Hello! I'm trying to set up a Broadvox SIP trunk on an iPECS-100, but I'm not having much luck. There is no cheat sheet for configuring with Broadvox (at least that I've found) but I've tried to copy the setup from other SIP providers.

Does the Broadvox trunk need to be configured a certain way for the iPECS? Or, are there any new settings in the latest version that I need to be aware of? I'm using MFIM/VD95M-E.0Dq APR/09

I have been able to make/receive calls by setting up the Broadvox SIP on a softphone.

Thanks for your help!

http://www.northfloridacommunications.com

Norstar & Vodavi phone systems and network cabling in Gainesville & Ocala Florida

 

[doktor]

I think that you can get some good hints form this one: thread1613-1545008

///doktor

 

[nfcphoneman]

Doktor,

Thank you for your quick response. I found that thread several days ago, and you did put a lot of helpful information there. Unfortunately, I still could not get the trunk to work.

http://www.northfloridacommunications.com

Norstar & Vodavi phone systems and network cabling in Gainesville & Ocala Florida

 

[doktor]

I have some other hints:
thread1613-1538121: Change of Broad band provider.
Here SIP was successfully installed with ipLDK-20.

Our IPECS was using s/w E.0 Dj...

///doktor

 

[nfcphoneman]

Saw that one too. Still no luck.

Thanks!

http://www.northfloridacommunications.com

Norstar & Vodavi phone systems and network cabling in Gainesville & Ocala Florida

 

[nfcphoneman]

I found out that most of my problems were coming from an incorrect router setting.

I was able to connect to Broadvox. Incoming calls work fine, but outgoing does not work. Broadvox says they are not getting the SIP info in the format they want it.

http://www.northfloridacommunications.com

Norstar & Vodavi phone systems and network cabling in Gainesville & Ocala Florida

 

[pleskuk]

Hi nfcphoneman,

Can you sniff your network and see how is the iPECS sends out SIP requests? I have a problem integrating with an Microsoft OCS which requires TCP over SIP connectivity, but iPECS keeps on sending UDP. Try with wireshark and paste results, I might be able to assist you.