Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ipe fibre remote card difference

Status
Not open for further replies.

monkey101

MIS
Apr 24, 2009
247
CA
I am trying to figure out the difference between the ipe fibre remote multi mode fibre receiver cards for 1 - 4 super loops. I have an A0773056 and an A0773054. What is the difference between the 2 besides $2000 dollar in price? they are both multi mode 1-4 super loops. Any help would be great.
 
As I recall, there are no obvious part numbers on the Fiber Remote Multi-IPE circuit boards themselves. They put the part number on the outside of the card "cage". So it's quite possible to have a multi-mode circuit board in a case that is labeled single-mode. I have received them like this from hardware resellers.
If your circuit boards say multi-mode 1-4 superloops on the faceplate then that's probably what they are, regardless of what the label on the case says. They should still work, even if the case is not labeled correctly.
 
Thanks alot. I was just selling it and the box I had it in was mislabeled as the single mode mode but it was the multi mode card i had.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top