Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ip_enable_group_ifs on Solaris 10

Status
Not open for further replies.

chrisgu

Technical User
Jun 7, 2001
1
GB
I want to use this feature on a Solaris 10 machine but from the release notes its been removed and I should be using IP Network Multipathing groups instead. I've read the sun doc but can't see what I need to do to enable it. I have started the deamon but havent got a clue to what else needs to be configure for it to work.

Basically I have mulitple interfaces on a server with two being connected to different external router, each have a default gateways and I just want to enable traffic to be sent out on the correct interface based on the outbound address used.

Using the old ip_enable_group_ifs feature its looks like you just need to set it to 1 and it will work.

Hope this makes sense.

Thanks

Chris.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top