hello
wanna bind the ip4700 into nt4 domain.
after connect to comport via terminal to the storageprozessor comport i get this: VxWorks System Boot
CPU: Carmel
Build: LONGBOW
Filesvr Prom: 03.06.15
DiagRev: Bios:4.06 v01.24 PROM:03.06.15
Storage Type FILESERVER
the diagnostics all pass!
then the system autoboots with the following messages
Starting loop initialization
Loop is initialized.
Loading image from fibre disk 2...
Calculated Checksum: 0x2dc4a586
Checksum in Header: 0xdfc12170
Checksum test failed on BP image.
Error in image_move from disk 2
Failed to load image.
ErrorTime: 10/6/2003 07:11:12 ErrorCode: 1012
ErrorDesc: Autoboot fails loading flare image from fibre disks.
EndError
FS >
What is to do now to get this working.
Theres a gigabit-lan and an adaptec scsi card on the storageprozessor.
i didn´t find any useful guide for config the machine
Please help.
thx
josef
wanna bind the ip4700 into nt4 domain.
after connect to comport via terminal to the storageprozessor comport i get this: VxWorks System Boot
CPU: Carmel
Build: LONGBOW
Filesvr Prom: 03.06.15
DiagRev: Bios:4.06 v01.24 PROM:03.06.15
Storage Type FILESERVER
the diagnostics all pass!
then the system autoboots with the following messages
Starting loop initialization
Loop is initialized.
Loading image from fibre disk 2...
Calculated Checksum: 0x2dc4a586
Checksum in Header: 0xdfc12170
Checksum test failed on BP image.
Error in image_move from disk 2
Failed to load image.
ErrorTime: 10/6/2003 07:11:12 ErrorCode: 1012
ErrorDesc: Autoboot fails loading flare image from fibre disks.
EndError
FS >
What is to do now to get this working.
Theres a gigabit-lan and an adaptec scsi card on the storageprozessor.
i didn´t find any useful guide for config the machine
Please help.
thx
josef