IP406v2 with DS30 - EXT ID's 3

[cjinsocal581]

THIS INFORMATION WAS FOUND UPON TESTING, IF ANYONE FINDS ANYTHING THAT DIFFERS, PLEASE INFORM.

Here is the extension ID list on an IP 406v2 using a DS30. I plugged the DS30 into each expansion port (6 total) and documented the Ext. ID's. Here is what I found:

IP406 v2
Unit type Extension ID Port on Unit
___________________________________________________
IP406v2 9 POT 1
IP406v2 10 POT 2
IP406v2 35 DS 1
IP406v2 39 DS 2
IP406v2 43 DS 3
IP406v2 47 DS 4
IP406v2 51 DS 5
IP406v2 55 DS 6
IP406v2 59 DS 7
IP406v2 63 DS 8

DS30(Exp. Port 1) 323 DS 1
THROUGH
DS30(Exp. Port 1) 352 DS 30

DS30(Exp. Port 2) 355 DS 1
THROUGH
DS30(Exp. Port 2) 384 DS 30

DS30(Exp. Port 3) 387 DS 1
THROUGH
DS30(Exp. Port 3) 416 DS 30

DS30(Exp. Port 4) 419 DS 1
THROUGH
DS30(Exp. Port 4) 448 DS 30

DS30(Exp. Port 5) 451 DS 1
THROUGH
DS30(Exp. Port 5) 480 DS 30

DS30(Exp. Port 6) 483 DS 1
THROUGH
DS30(Exp. Port 6) 512 DS 30
___________________________________________________________

Hope this is useful to some. Once I get the other modules, I will post that info as well.

Cheers!!
CJ

 

[bwilch]

http://www.bwilch.com/ipoport

It breaks down all the modules.

 

[cjinsocal581]

EXCELLENT!!

 

[IPGuru]

The DT modules would start 1 port earlier, but as they are not officialy supported on V3.0 it should not be a problem

 

[MrIPO]

Where did you get this stuff from Bwilch, dont tell me you connected every module on every base unit !!!!

VERY GOOD STUFF, cheers

Umm anotherprivatebuild !!!

 

[bwilch]

Actually MrIPO, I found it in another document I made a post about, it's an IP Office Matrix. I got the "clear" from Avaya to post it here so I did.

 

[Morrack]

Thank you for doing so, that's absolutely great info!

Peter Sherwood

Morrack Consulting

http://www.morrack.com