We have just installed a IP406 with 16 port & 30 port digital Modules ....running 3.0.40 on IP406
Modules are 5.0.40
Expansion unit 1 is a 16 port digital unit
Expansion unit 2 is a 30 port digital unit
Expansion unit 3 is a 16 port Trunk unit
Expansion unit 4 is a 16 port Trunk unit
*Not sure if its specific to a given module ?? or users but I am told that when they pickup the appearence key they get no intercom tone on the first button for awhile
and then it fine for awhile be it the receiver or speakerphone function
I have checked all the phones and they all have 3 Appearence keys on buttons 1 - 2 - 3
We have a few IP403 with R3.0.407901 without issues such as this ...possibe that its the IP406 or a given module
Just figure I would put this out there before calling
Avaya ....
Modules are 5.0.40
Expansion unit 1 is a 16 port digital unit
Expansion unit 2 is a 30 port digital unit
Expansion unit 3 is a 16 port Trunk unit
Expansion unit 4 is a 16 port Trunk unit
*Not sure if its specific to a given module ?? or users but I am told that when they pickup the appearence key they get no intercom tone on the first button for awhile
and then it fine for awhile be it the receiver or speakerphone function
I have checked all the phones and they all have 3 Appearence keys on buttons 1 - 2 - 3
We have a few IP403 with R3.0.407901 without issues such as this ...possibe that its the IP406 or a given module
Just figure I would put this out there before calling
Avaya ....