Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ip330

Status
Not open for further replies.

Ukraine1

Technical User
Apr 10, 2008
12
GB
I have nokia ip330 firewall,I bought it from someone and when I try to loggin through console its asking me for hostname and password when I enter the hostname as admin and password as password,it wont log me in.Any idea how to reset the credentials again in order to configure the firewall.I tried reset also but it wont work.
Any help would be greatly appreciated.
 
Hi,

The default user/password is admin/password

If you need to reset it, boot the machine to single-user mode (You can do this by logging into bootmanager then type 'boot -s') after this you can run the reset script by typing '/etc/overpw' and follow the prompts from there !

If you are still having trouble, you can do a fresh install from bootmanager by typing install and following the prompts from there (ofcourse you need to have the IPSO image ready)

Take care,
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top