IP trunks

[MarkoJ]

Hi all,

I have an Option 11c with an ITG card and 4 IP phones. I want to set up an IP trunk between the Nortel and a Cisco CME. Can this be done and if so how?

Thanks in advance

Markoj!

 

[dlesap]

Do you also have a Signaling server in PBX architecture?
If no, forget it.

You need at least:
CS1000M, S, or E
Rls 3.00
1 sigserv
1 Mediacard

and the right configuration

 

[pndscm]

Will CallManager 4.X (non-SIP) talk to a CS1000M Rls 4.00 using NRS? My concern is that Cisco CallManager may not talk in a protocol that the Nortel switch will recognize. Signaling should be H.323 on both ends.

 

[dlesap]

pndscm:
Yes you can interface CM non SIP and NRS.
CM configuration adaption are necessary but if works fine...