IP Trunking

[salo0920]

I have setup the MCK Office Extender and it does station based IP great. Does anyone know what product would allow IP trunking on a Norstar and has anyone actually done it?

If so, could you explain exactly how to connect 2 MICS using IP trunking?

Thanks,
Harold

 

[executone]

You could install RAD IPMux, but the cost is pretty high.

http://www.tdmoip.com/

I would look at replacing Norstar with the BCM.

Good Luck!!

 

[mikescience]

I have used OKI E&M interfaces to do VoIP trunking. In the one I did, we used Norstar (2)E&M cards to a 4 port E&M OKI Gateway on both sides. The programming is pretty eazy compared to others. The Gateways boxes will cost $3,000-4,000 on each side plus the norstar equipment. The T-1 intefaces are getting cheaper if you have a need for large volumes of trunking. Hope this helps. Also cheak out Cisco VoIP cards for the 2600 series routers.
MikeScience