IP TRUNKING

[IODDP]

Does anyone have printouts for ip trunking on BC12 sp6?

 

[abuokarem]

hi!
node 1
<RODAP:ROU=1;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
1 TL65 H'00000001 H'00000011 H'00000000 NO

END

<ROCAP:ROU=1;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
1 7110000000000010 4 2110000007 0 30 128 00151515 311110101091 001100

END

<RODDPEST=ALL;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE

70 1 1606100000000250006000000 0 3 0

END

<RINIP:LIM=1;
IP NETWORK INTERFACE DATA
BPOS GRP IP ADDRESS MASK ROUTER ETHCNF
1-0-30 1 192.168.100.80 255.255.255.0 192.168.100.245 2

END

<RIANP:ROU=1;
H.323 ROUTE DATA
ROU GRP IP ADDRESS LROUID RROUID CODECS
1 1 10.10.10.2 LOCK SEA 0123456789ABC

END


NODE 2


<RODAP:ROU=1;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
1 TL65 H'00000001 H'00000011 H'00000000 NO

END

<ROCAP:ROU=1;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
1 7120000000000010 4 3110000001 0 30 128 00151515 311110100091 001100

END

<RODDPEST=ALL;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE

70 1 1606100000000250006000001 0 3 0

END

<RINIP:LIM=1;
IP NETWORK INTERFACE DATA
BPOS GRP IP ADDRESS MASK ROUTER ETHCNF
1-0-32 1 10.10.10.2 255.255.255.0 10.10.10.1 2

END

<RIANP:ROU=1;
H.323 ROUTE DATA


BR

 

[rfpui]

Hi abuokarem
Wrong RODDx command for IP routing

RODDP EST=…..,IPOPT=YES; */dest can be all or & && /*

RODDI EST=..,ROU=…,SRT=….,IP=197.4.6.87,RROUID="REMOTE";

[tt]
<RODDP EST=8,IPOPT=YES;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST IP ADDRESS RROUID
8 99 10.80.1.130 REMOTE

END

<RODAP:ROU=99;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
99 TL65 H'00000111 H'00000001 H'00000000 NO

END

<ROCAP:ROU=99;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
99 7110000000000010 5 3110030001 0 30 128 03090912 111100000091 001100

END

<RODDP EST=8,IPOPT=YES;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST IP ADDRESS RROUID
8 99 10.80.1.130 REMOTE

END

<ROEDP:ROU=99,TRU=ALL;
ROUTE EQUIPMENT DATA
ROU TRU EQU IP ADDRESS SQU INDDAT CNTRL
99 003-1
99 003-2
99 003-3
99 003-4
99 003-5
99 003-6
99 003-7
99 003-8

END

<RIANP:ROU=99;
H.323 ROUTE DATA
ROU GRP IP ADDRESS LROUID RROUID CODECS
99 1 MAIN REMOTE 0123456789ABC

END

<RINIP:LIM=3;
IP NETWORK INTERFACE DATA
BPOS GRP IP ADDRESS MASK ROUTER ETHCNF
3-2-70 1 10.212.10.130 255.255.0.0 10.212.1.1 0

END

<
[/tt]


----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[whosrdaddy]

both aboukarem & rfpui,

check the codecs parameter of RIANP

I see it has default value, this is bad because 0 is G729AB codec (IMHO it is a far from ideal codec)

for best voice quality use this :
B204xxxxx (G711A, G729A, G729AB, G723)

for less bandwith consumption :
204xxxxxx

cheers

--------------------------------------
What You See Is What You Get

 

[FiveSwords]

Whosrdaddy,

You're right, G729 is not an "ideal" codec. But I think CODEC's are always a trade-off; using compression does save a lot of bandwidth.

I agree on your recommendation, but why do you favour G729A over G729AB? Annex B implements Voice Activity Detection, but is otherwise identical to G729A. This saves another 30-60% BW, especially important when BW is an issue.

 

[himdp]

You seldom, if ever, get something for nothing. VAD presents it's own quality issues such as speech clipping.

 

[whosrdaddy]

agreed on BW usage, BUT :

I heard 729AB and it is really an ugly codec ->
-voice clipping
-clicks
-speech volume fluctuations

I don't have any customer that accepts this kind of speech quality....

--------------------------------------
What You See Is What You Get