IP trunking between MXone TSE & Unify UC4000

[tamanpreet]

Hi

Can anyone help me to configure ip trunking between MXone TSE & Unify UC4000.
Parameters of MX one are
ROCAI:ROU=99,SEL=7110000000000010,SIG=011110000091,TRAF=03151515,TRM=5,SERV=3110000001,DIST=30,DISL=128,NODG=0,BCAP=001100;
RODAI:ROU=99,TYPE=TL65,VARI=00000011,VARO=00000000,VARC=00000110,FILTER=NO;
RODDIEST=8688,ROU=99,ADC=0717100000000250107001101000,TRC=0,SRT=1,NUMACK=0;

And configuration of Unify is attached

 

[lindelott]

I do not see any ip address in RODDI command...

RODDIEST=8688,ROU=99,ADC=0717100000000250107001101000,TRC=0,SRT=1,NUMACK=0,ip="UNIFY ip address";

and i do not see RIANI command

(i.e g711 a-law)
RIANI:ROU=99,CODECS=B-1-2-3-4-5-6-7-8-9-A-C-0;

Denny

 

[tamanpreet]

Hi

Sorry for delay in response i was on vacations.

I had tried this IP (148.135.122.76) of unify added in RODDI first and then tried this adding unify IP in ROEQI. but only miss calls i got from UNIFY to MX One.

If you have working parameters please share with me. whatever changes would be in Unify or Mx-one.

 

[tecnouser]

Hi,

I don't know if this post is still active, so if its still so I can say that the configuration of the Unify looks OK , but can you post the configuration of the MXONE especially the codec priority so that we can check

Tecnouser