IP trunk

[bagao]

Dear all,
Now I need create IP trunk between BP250 and MXONE telephony system. I already config on BP250, but I don't know how to config IP trunk on MXOne.Would you please help me on this case? I have card IPLU with 16 licenses,but I want to get 1 license to connect between BP250 and MXONE.
Thanks

 

[rfpup]

You already have 16 licenses so no need for additional license. These licenses (that you have) are valid for IP ext + IP trunks

 

[bagao]

I intend to cut 1 license in 16 lic that I have to connect BP250 and MXONE.
Would you please tell me what to do? please for detail, I don't have Alex, so I'm investigating about MXONE by Tek-tip.
Thanks

 

[rfpup]

No need to cut license at all.
Licenses are values written in e file and IPU read this file in order to know how many channels maximum to put in service when talking to MX-ONE or IP extensions.
You may find in this forum how to create IP route from MX-ONE towards BP250 (at least from MD110 to BP)

 

[bagao]

Hi rfpup,
I've found on this forum configuration that I need,but I din't find yet.
Because I'm in hurry,please help me