IP Trunk outbound dialing.

[f0netech]

Not a issue that is service affecting, but would like some help if anyone can. We have an IP trunk connecting two offices that we are planning on using for xtn-to-xtn dialing which works OK. During testing, we connect to this trunk via the TAC and tried to use this trunk to dial an outside call. In one office they are able to do this without issue, but in mine I get the following:

09:18:07 dial 119
09:18:07 term trunk-group 99 cid 0x2f92
09:18:07 dial 119
09:18:07 seize trunk-group 99 member 1 cid 0x2f92
09:18:07 Calling Number & Name NO-CPNumber xxxx xxxx
09:18:07 Proceed trunk-group 99 member 1 cid 0x2f92
09:18:07 G711MU ssff ps:20 rn:2/2 10.151.3.53:2704 10.150.8.11:41944
09:18:15 denial event 1199: ISDN outgoing call barred D1=0x108 D2=0x134
09:18:15 idle trunk-group 99 member 1 cid 0x2f92
09:18:18 idle station xxxx cid 0x2f92

COR values seem to be OK. Any ideas what I need to look at?

 

[98Converter]

Maybe a COR issue? Or trunk group is set-up for inbound only?

Thanks,
CJH

We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.

 

[f0netech]

Trunk group is set for two-way. COR doesn't seem to be the issue.