Trying to four-digit dial from BCM50 to CS1K. BCM50 is registered to NRS. Setup H.323 Trunks with Line Type Pool:BlocA. Built Route (003) to use Pool:BlocA (Privae DN Type). Users dial destination code which accesses Pool:BlocA. Get SETUP NAS xxxx and then DISCONNECT (normal clearing). Calls seem to be hitting two IP Trunks Simultaneously.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IP Trunk Calls Failing between BCM50 and CS1K
- Thread starter VTTD1870
- Start date
Firebird Scrambler
Systems Engineer
Have you read this guide below?
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
norstarboy125
Vendor
Take a look at your calls using Monitor and see what's going on.
Jeremy J. Carter
Charm City Communications
Norstar. BCM. CS1000 Programmer
Jeremy J. Carter
Charm City Communications
Norstar. BCM. CS1000 Programmer
- Status
Similar threads
- Locked
- Question
- Question
- Question