Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Trunk Call forward doesn't work

Status
Not open for further replies.

tflwkr

Programmer
Jun 20, 2003
9
LI
Hi all

I have problem with Call Forward and Hunt at the Meridian Network

All Nodes have Rel.4.00T Deplist 9

If a subscriber of a any Opt.11 (H323 Endpoint) set a Callforwarding to another Subscriber in the network par example to 111 or Callpilot which were located on CSE or to any other subscriber, or public number, the Callforwarding does not work and the caller hear the busy tone..... if the caller comes from another Opt.11 (H323 Endpoint ) or a AudioCodes Faxbox

If the call comes from public network, the Callforwarding works.

If the call comes from CSE or one of the Mediagatway T (all 3 have a SigServer) the Callforwarding works also.

All Opt. 11 are connected to the network with IP Trunk 3.01

I've made d-channel trace and i get the message

Cause: SWED EQIP CONGESTION
DIAG: 042
The routes are on ESN5 and i've checked already the NCOS and CLS

The routing entries in the NRS are on level 0 regional
I've a CDP Network

May be anyone have an idea where the problem is

Thanks

tflwkr

PS Sorry I start a new thread now


 
Maybe you can try setting in the DChannel's set NASA to YES
across the network you need to do a:-

LD 96
DIS DCH x

LD 17
CHG ADAN DCH X
Return to the Prompt

Cheers
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top