IP Telephony between Cisco CME and Siemens Hipath 3750 with HG 1500

[flanet]

Hi Guys ,

I need to connect my CME to a siemens Hipath 3750 with HG 1500 card .
Anyone have done this yet ?
I´m using a SAT connection .
In the siemens site i have a Cisco 3700 router , should i connect it to the HG 1500 card ? Can i use G729 ?

Thanks

 

[Silverblade]

If your cme can handle calls with the qsig protocol it can work. Otherwise i think you can forget it.
I once had a costumer that wanted to connect a siemens to a samsung pabx. The problem was that the samsung only could use real ip protocols (h323) while the hg1500 only can use qsig or cornet on its ip line.

Good luck