Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ip routes between multile ip offices

Status
Not open for further replies.

RotoOrb

IS-IT--Management
Jul 29, 2005
54
NZ
hi, we are running 3x ip office via CSN, all work fine, but we have now noticed when you dial an extension say at site 3 via site 2 from site 1

Site 1 site2 site3

can see can see
site3 site1
users users

when dial site 3 users, call tries to dial, can see thru the system status, but no voice?

we use G7.11Alaw codec
 
Uncheck Allow Direct Media path on all the sites. Give that a shot. Also, make sure you DON'T have mesh setup. You need to have 1 site be the "Main" site, and have 1 IP line with to each remote site.
 
That sure does sound like a DMP issue.
Its becoming more and more common at the moment.

Many will say its a routing issue 100%. Whilst I agree with that I still seem to get the issue on the best configured networks.

Also some sounhd advise. In both your IP route and IP Line sections ensure in no way you are operating a meshed topology.

ACA - IP Office Implement
ACA - IP Telephony
CCENT - Cisco ICND1
CCNA - Working towards.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top