Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Route clarification required

Status
Not open for further replies.

invincible2k

Technical User
Apr 26, 2016
3
OM
I have Avaya IP Office 500v2 at 3 different location connected through VPN. Can anyone tell me IP Route that need to be added on all 3 sites for all locations.

Site A LAN Interface: 192.168.42.1
Site B LAN Interface 192.168.46.10
Site C LAN Interface 192.168.44.51
 
0.0.0.0 / 255.255.255.255 / gateway

on all sites

| ACSS SME |
 
IP: 0.0.0.0
Subnet Mask: 0.0.0.0
Gateway: Whatever.Your.Routing.GatewayIS
Interface: WhateverInterfaceYouGoOutOf

This will route all of your traffic to your gateway. I cannot tell you what your gateway is, it's not always the same for everyone, but it's usually .1 or .254

USUALLY if the IT has their act together they will do the routing in their own gateway so you don't have to muck around with it.



-Austin
I used to be an ACE. Now I'm just an Arse.
qrcode.png
 
To make sure that the IPOs have the right route goto system status and from the networking run a ping. If you have a reply then you are set up properly.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top