The IP phone screens used to shut off after a certain amount of screen saver time but now they are always on. I think it happened after the last firmware upgrade. Is rolling back completely or partially an option? We use 9630 and 9620 style phones. Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IP Phone Screen Always On Now
- Thread starter kiwiwire
- Start date
kwing112000
Vendor
i am pretty sure you can set this with the 46xxsettings file. you may need to edit yours and then reboot the phones to pull the file.
Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries
Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries
anbcunningham
MIS
If you edit the 46xxsettings file and change this section:
## Note:
## This setting activates the Avaya Screen Saver which is
## different than the "idle screen" accessed by WMLIDLEURI.
## While it is possible to use WMLIDLEURI as an "idle
## screen", it is recommended that the SCREENSAVERON
## timer and the Avaya Screen Saver display be used for
## screen saver purposes.
## The available range is 0-999.
##
SET SCREENSAVERON 240
## Note:
## This setting activates the Avaya Screen Saver which is
## different than the "idle screen" accessed by WMLIDLEURI.
## While it is possible to use WMLIDLEURI as an "idle
## screen", it is recommended that the SCREENSAVERON
## timer and the Avaya Screen Saver display be used for
## screen saver purposes.
## The available range is 0-999.
##
SET SCREENSAVERON 240
- Status
Similar threads
- Question