IP Phone running on a different VLAN from the Controllers

[conquer2006]

I have two MXe III on Cluster, and the controllers are on different VLAN699 of IP 10.182.102.130-157,Subnet- 255.255.255.224 Gateway 10.182.102.129 and the IP phones on another VLAN601 of IP Range 172.16.0.0- 254, Gateway 172.16.1.1.I am pointing to a PABX Core Switch with IP 10.182.102.158, All the IP phones were setup static on the phones, DHCP is not ENABLED but the phones are not registering. what can I do to achieve my aim. Attached below is my setup. Is there any other thing I need to setup on the DHCP option?

 

[Lundah]

Voice VLAN ID on the controller needs to either be the VLAN ID of the controller if the switchport is using 802.1Q tagging, or 1 if the switchport the controller is talking to is untagged.