IP phone restictions?

[rfpup]

Hi all,
Please can anybody give any idea for the following?

assume that a MD with ELU 32 is installed at point A.
The IP phones are spread at point A, B, C geographically located in different towns.
Is it any possibility to restict most of the IP phones at site A not having possibility to call to the IP phones at site B?
and so on the same for sites B and C?

Thank you.

 

[Isinor]

Yes... I think so, using that the last digits of TRAF d9 d10 and the Traffic Connection Matrix, TC Commands. First you need ensure that you don’t mess up any existing TCMAP… Using TC commands…

TCMAP:CON=T;

If you are not using the MAP it will be all zero’s except 15 which will be all ones. If you are using he map don’t blindly follow this example and hope things will be fine…

Then set up 3 new CSP's… use the existing values for all parameters only change the last 2 digits of TRAF... E.g. A is TRAF=xxxxxxxx01 B is TRAF=xxxxxxxx02 C is TRAF=xxxxxxxx03

GESPI :CSP=…,TRAF=…, SERV=…, CDIV=…, ROC=…, NPRES= …;

The set up the matrix… using the TCMAS…

TCMAS:CON=ALL,A=01,B=01;
TCMAS:CON=ALL,A=02,B=02;
TCMAS:CON=ALL,A=03,B=03;

Then change the IP extension CSP to suit.
GEDICIR=...,CSP=…;



Regards
Isinor

 

[rfpup]

Thank you Isinor