ip phone options

[whender]

Where do I find documentation on ip 2001 manual ip config options? s1, s3, xas and so forth.

Thank,

Wayne

 

[nooop]

S1 is (server 1), or BCM IP address, S2 is (server 2), but not sure if I have seen S3 ever. XAS is external Application server.
All you do is set DHCP to No, then manually put the BCM IP address for S1 at port 5000, then set s2 to the same BCM IP and use port 7000, give it a good IP address, subnet and gateway and save and reboot. I do the 2 port numbers because some sets work better on port 7000 so I use the server retry for ports only. Actually on a I2001, the display is so small that you can't navigate as quickly as an IP1140E etc.

 

[Dasheen]

Noop:

Why port 5000? I was taught that port 7000 was for BCM and 7300 for SRG.