IP Phone Management Tool 1

[BlackSmurf]

Hy.

Is there any IP Phone Management Tool so i can see the status, ip addres, firmware ... of the ip phones?

thx

 

[bigjohn8210]

none that i know of. If you have a pc setup with the latest manger level on your system open and you set you ip phone tftp setting as that pc they will download the latest firmware.

 

[dencom]

use the monitor. It has a simple tool to display relevant information.

Arnoud

 

[SuperJenks]

OK, I find these codes quite useful, so this might help a few people.

*To view IP settings and firmware on IP Phones*

Press the following in sequence:

Hold 8439# (8439 spells view on keypad)

*To restart IP phone or reset IP phone settings*

Press the following in sequence:

Hold 73738# (73738 spells reset on keypad)

*To view or change Ethernet interfaces on IP Phones*

Press the following in sequence:

Hold 468# (468 spells INT, short for interface on keypad)

 

[NicolasR]

To manage IP terminals.
Use Monitor with System\Development Tracing ticked.
Then go in Status\IP Phone Status.

You can also get list of IP Terminals registered with GK H323. It's just a file to get using tftp client.
Consult technical bulletins to get the name of this file.

 

[BlackSmurf]

Ah cool. That sounds good.

Thx